Best How To Repair Rocking Chair Runner

Step 1 - Glue.

How to repair rocking chair runner. Remove the clamps and test the fit of the new runner into the chair legs. Step 3 - Reinforcement. Apply glue to both the rocker pieces together and make sure to select s strong wood glue.

Turn the rocking chair to its side with the existing runner positioned on top of the board. Step 2 - Clamping. Many crafts and furniture stores have covers available that will work.

Either way to most effectively glue it you might have to finish breaking it first. If possible use a flat rubber runner or a larger oval rug on which the chair can be centered. Made in USA from solid oak to last you for years.

If the fit is too snug sand the inside of the hole with 100-grit sandpaper to enlarge the hole. Place the wood across two sawhorses and clamp it in place with C-clamps or hand-screw clamps. If you do have to do it yourself be sure you can pull the crack tight with your clamps before you do it with glue.

Choose from the longer lasting Steam Bent or Cut type. Wait 72 hours and apply another coat. One type of clamping might be to put wax paper or a plastic bag around the rung then wind tight stretchy cord like nylon around the top 10-20 times to pull and hold the pieces together.

Trace the outline of the existing runner onto the board with a pencil or marker. Get hold of the wood clamp and install it to ensure that the 2 pieces are stuck to one another. I show you step by step.